Service hotline:

400-690-0636

Location:Home > PRODUCTS > Pump Tubings

Tygon F-4040-A
◆Norprene A-60-F tube is imported for peristaltic pump  
◆Service life is up to 10,000h 
◆Ideal for pressure, vacuum condition
◆Resistance to heat, ozone, acid & alkali, anti-aging & oxidation
◆Repeated high temperature and high pressure sterilization, heat sealing and weldable. ◆Very suitable for food, dairy application
◆Good liquidity, high dielectric constant
◆Light brown, opaque, low permeability of oxygen, carbon dioxide, nitrogen



Instruction of Function

Tube Saint Gobain Tygon F-4040-A tube
Color Yellow semitransparent
Temperature endurance -37~74℃
Hardness 63A
Permeability 12
UV resistance A: perfect, no influence
Ozone resistance B: better, tiny influence
Acid and alkali resistance General
Life 70 hours
Identification --
Application Soft, winding and easy to install, can withstand most of petrochemical products, not brittle, not swell. Anti ozone and ultraviolet, not easy to aging, dedicated to hydrocarbons, fractions, petroleum, gasoline, diesel, kerosene, fuel, chip composite oil, glycol-based coolant, engine fuel, compatible with most petroleum-based products
Remark:
1. Breathability (for nitrogen test) the bigger value, the better permeability, and vice versa
2. Tube life test conditions: 17# (6.4×9.6×1.6), room temperature 23℃, the United States Masterflex peristaltic pump of 3 rollers Easy-Load pump head, 600rpm speed, delivery back pressure 0psi, water medium, continuous operation until the tube cracks (the value provided by Saint Gobain, for reference only).

Feature

◆ The Tygon F-4040-A is an imported peristaltic pump tube.
◆ Special for hydrocarbons, petroleum and fractions, suitable for gasoline, kerosene, fuel, cutting fluid and alcohol coolant
◆ Low permeability and permeability, high dielectric constant
◆ Can be used for strong acid and alkali
◆ Transparent and yellow, operation temperature: -37℃~74℃
JIHPUMP product engineers are always ready to support you with pump tube application and procurement, to ensure that you can make good use of imported tube.



Parameter
Tube no 13# 14# 16# 19# 25# 17# 18#
Tube wall (mm) 1.6mm(1/16英寸)
Tube wall (mm) 0.8 1.6 3.1 2.4 4.8 6.4 7.9
Fitting size 1.6(1/16) 1.6(1/16) 3.2(1/8) 2.4(3/32) 4.8(3/16) 6.4(1/4) 9.5(3/8)

Sustained pressure

a
1.7bar 1.4bar 1.0bar 0.7bar

Intermittent pressure

a
2.7bar 2.4bar 1.4bar 1.0bar
Vacuum degree suction 660mm Hg8.8water 510mm Hg6.7m water

 

Tube Size Reference
Tube no 15# 24# 35# 36# 73# 82# 86# 88# 90# 92#
Tube wall (mm) 2.4mm(1/1inch) 3.2(1/8inch) 6.3 4.8mm(3/16inch) 6.3  
ID (mm) 4.8 6.4 7.9 9.6 9.7 12.7 9.6 12.7 19 25.4
Fitting size 4.8(3/16) 6.4(1/4) 9.5(3/8) 9.5(3/8) 3/8 1/2   1/2   1

Sustained pressure

a
1.7bar 1.4bar 1.0bar 0.17 0.2 0.25 0.14 0.25

Intermittent pressure

a
2.7bar 2.4bar 1.4bar 0.27 0.27  0.3 0.14 0.3
Vacuum degree suction 660mm Hg8.8m Vacuum degree suction 610mm Hg8.3m Vacuum degree suction            

 

Micro Flow Tube Size Parameter
Tube no 1×1 2×1 2.4×1 3×1 4×1 1×1Three card tube 2×1Three card tube 3×1Three card tube
Tube wall (mm) 1 1 0.8 1 1      
ID (mm) 1 2 2.4 2.4 4      

Sustained pressure

a
0.1      

Intermittent pressure

a
0.1      
Material Platinum vulcanized silicone rubber  


Leave a message