Service hotline:

400-690-0636

WT-600CA Series ≤6000mL/min
0

■ Large-screen true color LCD graphic display, the basic and relative information are displayed on one screen

■With brushless motor drive and powerful engine, 6 pump heads can be connected in series at most.

■ Functions:flow adjustment, timing and filling

■ Functions: automatically identification footswitch, filling with automatic function and infrared sensing

■Accepting analog signal and 485 communication agreement

■Experiment, sampling, filling, industrial large flow pumping, dispensing, teaching equipment


Flow Rate (ml/minMediumwater

Pump head 

153Yx 253Yx
Tube 14# 16# 25# 17# 18# 15# 24#  35#

36#

ID×Wall

1.6×1.6

3.2×1.6 4.8×1.6

6.4×1.6

7.9×1.6

4.8×2.4

6.4×2.4

7.9×2.4

9.7×2.4

Flow rate

6.3~125

23.5~470

56~1120

89~1780

110~2200

45~900

81~1620

117~2340

150~3000

Note 1.Above date is measured in JIHPUMP laboratory at room temperature , for reference only;
2.Tubing material, size, Viscosity, suction and lifting length will have some impact on flow rate. 

Flow Rate (ml/minMediumwater
Flow rate DGx 253D 314D
Tube 14# 16# 25# 35# 36# 14# 16# 25# 17# 18#
ID×Wall 1.6×1.6 3.1×1.6 4.8×1.6 7.9×2.4 9.6×2.4 1.6×1.6 3.2×1.6 4.8×1.6 6.4×1.6 7.9×1.6
Flow rate 8-150 23-450 30-593 260-5176 300-6000 0.03-153 0.08-577 0.17-1114 0.3-1593 0.4-2012
Note 1.Above date is measured in JIHPUMP laboratory at room temperature , for reference only;
2.Tubing material, size, Viscosity, suction and lifting length will have some impact on flow rate. 


Introduction of Function

■ With large-screen true color LCD graphic display, the function of pump has flow adjustment, timing and filling.

■ Basic functions: full-speed emptying, sucking-back angle setting, flow correcting, timing, working temperature detecting.

■With DC brushless motor drive and large torque, the pump can drive multiple peristaltic pump head.

Menu: flow operation (screen display speed), regular operation (the pump can be scheduled to run), filling operation (the pump can accept infrared sensor)

■Operation instructions: panel operation, foot switch (automatic identification), external control (analog signal and communication protocol) running. 

■With rotary code switch basic operation, the pump operation is convenient and practical; with sound and text prompts, the customer has no need special train to learn how to operate.

■Adapted with 153Yx、253Yx(6 pump heads in serious at most)and 253D pump head(2 pump head in serious at most) optional.

■Pump head material, PPS, is strongly corrosion-resistance (optional); Lightly color PSU with good appearance can resist from chemical corrosion (optional).

■ Standard configuration: LCD driver, pump head, tubes (2 meters optional). 

■Optional configuration: footswitch, spare tubes, filling needle, tube connector, and anti-floating head.

Note: The footswitch controller methods is jogging and continuing, and the pump automatically identifies the external foot switch.



Parameter

Rotary speed 30~600.0rpm, clockwise or counter-clockwise can be swift.
Speed adjustment Rotary code switch
Function Adjusting flow rate、timing、filling
Basic functions full-speed emptying, sucking-back angle setting, flow correcting, timing, working temperature detecting.
Sucking-back angle 0~360°optional
Footswitch Identify foot switch automatically(the pump can be set as jogging or continuing condition)
Filling The pump can be set to run automatically or infrared sensor running (no container, no filling)
Size length304×width166×height178(mm),weight:4.1-5.1Kg
Working environment 0-60°C,relative humidity less than 85%
Power Ac220V50/60Hz(Ac110v50/60Hzoptional),120W
Pressure ≤0.2Mpa(If working time is short, the outlet pressure can get0.27MP)
External control Starting/stopping、CW/CCW、speed controlling:0.5-5V/10V、4-20mA、0-10KHz;RS485communication fits with MODBUS agreement.
IP Grade IP31


WT-600CA/153Yx/253Yx Dimension

WT-600CA/153Yx Dimension

WT-600CA/253D Dimension

WT-600CA/253D Dimension

WT-600CA/314D Dimension


WT-600CA/DGX Dimension