Service hotline:

400-690-0636

BT-600CA Series ≤3000mL/min
0

■ Large-screen true color LCD graphic display, the basic and relative information are displayed on one screen
■ Functions:flow adjustment, timing and filling
■ Rotary code switch and touching keypad control
■ Functions: automatically identification footswitch, filling with automatic function and infrared sensing

■Accepting analog signal and 485 communication agreement

■Experiment, sampling, filling, industrial large flow pumping, dispensing, teaching equipment

■Bio-medicine, chemical industry, environmental protection, fruit juice, printing, and atomic energy electronics industry


Flow Rate (ml/min,medium:water)

Pump head 

153Yx 253Yx
Tube 14# 16# 25# 17# 18# 15# 24#  35#

36#

ID×wall

1.6×1.6

3.2×1.6 4.8×1.6

6.4×1.6

7.9×1.6

4.8×2.4

6.4×2.4

7.9×2.4

9.7×2.4

Flow rate

0.03~125

0.08~470

0.17~1120

0.3~1780

0.4~2200

0.2~900

0.3~1620

0.4~2340

0.5~3000

Note 1.Above date is measured in JIHPUMP laboratory at room temperature , for reference only;
2.Tubing material, size, Viscosity, suction and lifting length will have some impact on flow rate. 


Pump head DGX 314D
Tube 14# 16# 25# 14# 16# 25# 17# 18#
ID×wall 1.6×1.6 3.1×1.6 4.8×1.6 1.6×1.6 3.2×1.6 4.8×1.6 6.4×1.6 7.9×1.6
Flow rate 0-150 0-450 0-593 0.03-162 0.08-630 0.17-1056 0.3-1848 0.4-2280
Note 1.Above date is measured in JIHPUMP laboratory at room temperature , for reference only;
2.Tubing material, size, Viscosity, suction and lifting length will have some impact on flow rate. 


Feature

■ DG with multichannel, 153Yx and 253Yx pump head can be connected in series, 314D can not be connected in series
■ Pump head material, PPS, is strongly corrosion-resistance; Lightly color PSU can resist from chemical corrosion.

■ The function of pump is timing and storage, setting operation and stopping time and programming times, so as to dispense and delay shutdown conveniently.

■ Operation of membrane switch: starting/stopping、clockwise and counter-clockwise, up and down speed, timing and dispensing settings.

■ External signal controlling: foot switch, analog signal (0-5V 0-10V 4-20mA) and MODBUS general agreement.

■ Standard configuration: digital display driver, pump head, tubes (2 meters optional). 
■ Optional configuration: footswitch, spare tubes, filling needle, tube connector, and anti-floating head.



Specification
Display Graphic LCD display
Rotary sepeed 0.1~600rpm,cw/ccw rotation
speed adiustment Rotary switch
Function Adjusting flow rate,timing,filling
Basic functions full-speed emptying, sucking-back angle setting, flow correcting, timing, working temperature detecting.
Sucking-backangle 0~360°optional
Footswitch Identify foot switch automatically(the pump can be set as jogging or continuing condition)
Filling The pump can be set to run automatically or infrared sensor running (no container, no filling)
Size Length 304×width166×high178(mm) ,weight:4.1-5.1Kg
Working environment 0-60℃,relative humidity85%
Power Ac220V50/60Hz (Ac110V50/60Hzoptional),54W
Pressure ≤0.2Mpa(If working time is short, the outlet pressure can get 0.27Mpa)
External control Starting/stopping、CW/CCW,speed controlling:0.5-5V/10V、4-20mA,0-10KHz;RS485communication fits with MODBUS agreement.
IP rating IP31


BT-300CA/153Yx/253Yx Dimension
BT-300CA/153Yx Dimension

BT-300CA/314D Dimension

BT-300CA/314D Dimension

BT-300CA/DGX Dimension

Leave a message