Service hotline:

400-690-0636

BT-100CA Series ≤500mL/min
0

■ Graphic LCD displays the parameters and running state
Three functions: flow adjustment, timing and filling.
■ Rotary switch and touch keypad control

■ Accepting analog signal, 485 communication agreement

■ Experiment, sampling, filling, industrial large flow pumping, dispensing, educational equipment

■ Biomedicine, chemicals, environmental protection, fruit juice drinks, printing, atomic energy, electronics industry


Flow Rate (ml/min, medium:water)

Pump head

            153Yx (314D)

253Yx

Tube

14#

16#

25#

17#

18#

15#

24#

35#

36#

ID×wall

1.6×1.6

3.1×1.6

4.8×1.6

6.4×1.6

7.9×1.6

4.8×2.4

6.4×2.4

7.9×2.4

9.7×2.4

Flow rate

0.02-21

0.07-79

0.17-194

0.29-275

0.39-380

0.14-135

0.26-248

0.26-390

0.5-500

Note 1.Above date is measured in JIHPUMP laboratory at room temperature , for reference only;
2.Tubing material, size, Viscosity, suction and lifting length will have some impact on flow rate. 


Pump head

DG

Tube

1.02×0.86

2.79×0.86

ID×wall

1.02×0..86

2.79×0.86

Flow rate

0.001-5.8

0.001-22.6
Note 1.Above date is measured in JIHPUMP laboratory at room temperature , for reference only;
2.Tubing material, size, Viscosity, suction and lifting length will have some impact on flow rate. 


Feature

■ Large-screen color LCD graphic display, the basic and relative information are displayed on the same screen.

■ Basic functions: full-speed emptying, sucking-back angle setting, flow correcting, timing, working temperature detecting. Menu: flow operation (screen display speed), regular operation (the pump can be scheduled to run), filling operation (the pump can accept infrared sensor)

■ Operation instructions: panel operation, foot switch (automatic identification), external control (analog signal and communication protocol) running.

■ With rotary code switch basic operation, the pump is convenient and practical; with sound and text prompts, the customer has no need special train to learn how to operate. 

■ Adapted with 153Yx、253Yx、and DG pump head optional; If 2 pump heads connected in serious, the flow rate will be twice bigger.

■ Pump head material, PPS, is strongly corrosion-resistance; Lightly color PSU with good appearance can resist from chemical corrosion.

■ Standard configuration: LED driver, pump head, tubes(2 meters optional)

■ Optional configuration: Foot switch, spare tubes, filling needle, tube connector, and anti-floating head. Note: The footswitch controller methods is jogging and continuing, and the pump automatically identifies the external foot switch.



Specification
Display  Graphic LCD display
Rotary speed  0.1~100.0rpm, cw or ccw rotation
Speed adjustment  Rotary switch
Function  Adjusting flow rate, timing, filling
Basic functions  full-speed emptying, sucking-back angle setting, flow correcting, timing, working temperature detecting.
Sucking-back angle  0~360°optional
Foot switch  Identify foot switch automatically(the pump can be set as jogging or continuing)
Filling  The pump can be set to run automatically or infrared sensor running (no container, no filling)
Size  L304×W166×H178mm, weight 3.5-4.5Kg
Working environment  0-60℃, relative humidity less than 85%
Power   Ac220V50/60Hz (Ac110V50/60Hz for option) 18W
Pressure  ≤0.2Mpa (If working time is short, the outlet pressure can get 0.27Mpa)
External control

 Starting/stopping, CW/CCW, speed controlling: 0.5-5V/10V,4-20mA,0-10KHz, RS485communication fits with MODBUS agreement

IP rating  IP31 


BT-100CA/153Yx/253Yx Dimension

BT-100CA/153Yx Dimension

BT-100CA/314D Dimension

BT-100CA/314D Dimension

BT-100CA/DG Dimension

Leave a message